Transparency Interleaving - Canon imageRunner 5075 Manual

Transparency Interleaving

3
3-38
Settings Menu
Off * , Blank, and Printed
If you are printing on transparencies, you can use this setting to output a sheet of
paper after each transparency. The paper can be blank, or it can be a paper copy
of the transparency.
If [Off] is selected, no sheets are interleaved with the transparencies.
If [Blank] is selected, a blank sheet of paper is inserted between each
transparency.
If [Printed] is selected, a printed paper from the print job is inserted between each
transparency.
NOTE
This function is not available if 'Copy Set Numbering' is set to [On].
When printing multiple copies, the [Offset+Group] for the 'Finishing' option cannot
be used.
If the 'Finishing' settings are specified as [Rotate+Group], [Offset+Group], and
[Staple+Group], then [Rotate+Collate], [Offset+Collate], and [Staple+Collate] are
specified.
If [Printed] is selected, the paper printouts are included in the Prints count.
However, if [Blank] is selected, they are not included in the Prints count.