2
Press [Set]
both the horizontal and vertical directions.
Press [Auto] to set the number of times the image will repeat automatically. To make repeated
images with the number of repeats automatically set, select the paper size. The original image
is then copied so that the maximum number of images possible fits onto the selected paper
size.
Press [-] or [+] to set the number of times the image will repeat manually.
If you want to specify the amount of space between repeated images, press [Margin Settings].
If you want only a designated area on the original to be repeated, press [Framing].
IMPORTANT
Depending on how many times you have manually set the image to repeat, some of the images
may overlap.
3
Press [Done].
Erasing Shadows and Frame Lines from Copies (Frame
Erase)
For instructions on this procedure using the Regular Copy Basic Features screen, see "Frame
Erase," on p. 4-43.
NOTE
For instructions on entering values in inches, see Chapter 2, "Basic Operations," in the Reference
Guide.
Making Copies by Erasing the Frame around the Original (Original
Frame Erase)
1
Press [Process/Layout]
set the number of times you want the image to repeat for
[Frame Erase].
Process/Layout Settings
7
7-73