1
Press [Process/Layout]
2
Press [Pen Entry].
3
Press [Start Scan].
IMPORTANT
Confirm that the original is placed on the platen glass.
4
Designate the area using the edit pen.
IMPORTANT
You cannot designate a rectangular area and a polygonal area at the same time.
To designate a rectangular area with two points:
Designate two opposing points with the edit pen.
You can designate up to four different areas.
To designate an area with multiple points:
Press [Multi-point]
After designating the last point, press [Fix Multipoints].
You can designate up to 10 points.
[Area Designation].
specify the area with the edit pen.
Process/Layout Settings
7
7-69