Mirror Image; Area Designation - Canon CLC5151 Copying And Mail Box Manual

Mirror Image

This mode enables you to copy the original image reversed, as if it were a reflection in a mirror.
NOTE
The Mirror Image mode is available for the Copying function only.
4
1
2

Area Designation

This mode enables you to frame areas to scan/copy, or areas to blank out in the scanned
image. You can designate up to four areas using the edit pen on the preview screen, or the
numeric keys on the control panel. You can designate up to four different areas.
IMPORTANT
• To use Area Designation (Framing) with the Image Repeat mode, first specify the Image Repeat mode,
and then designate the desired area. Only one area can be designated.
• The designated area is too small, the colour original may be scanned in the Black mode even if the
colour mode is set to 'Auto-Color Select'.
4-66
Using Image Creation Modes
Original
Place your originals
Press [Mirror Image].
press [Special Features]
Copy
[Image Creation].