Auto Zoom; Copying - Canon CLC5151 Copying And Mail Box Manual

Auto Zoom

You can set the machine to automatically select the appropriate copy (zoom) ratio based on the
size of the original and the selected copy paper (record size). The same copy (zoom) ratio is
used for the horizontal (X) and vertical (Y) axes. Any copy ratio from 25% to 400% may be used.
3
IMPORTANT
• You cannot scan/copy highly transparent originals, such as transparencies, using the Auto setting on the
Copy Ratio screen. Use the preset Zoom or Zoom by Percentage mode instead.
• To use the Auto setting on the Copy (Zoom) Ratio screen, your originals must conform to one of the
standard paper sizes:A3, A4, A4R, A5, A5R, or A6R. (You can place A6R originals only on the platen
glass.)
NOTE
• If you notice a difference between the automatic copy (zoom) ratio and the actual copy/record size, you
can try to eliminate this error by making a Zoom Fine Adjustment in Adjustment/Cleaning (from the
Additional Functions screen). (See Chapter 4, "Customizing Settings," in the Reference Guide.)
• When copying, to cancel this setting, press [Copy Ratio]
• When storing a document in an inbox, to cancel this setting, press [Copy Ratio]

Copying

1
3-14
Changing the Copy (Zoom) Ratio
Original
Place your originals
If necessary, see the screen shot in step 1 of "Copying" in "Preset Zoom," on p. 3-10.
IMPORTANT
Make sure that you select a paper size other than [Auto]. If you do not select a paper size, the
copy ratio is automatically set to match the size of paper loaded in paper drawer 1.
[Auto].
press [Copy Ratio].
Copy
[Auto] [Cancel].