Collating Copies into Groups of the Same Page (Group)
For instructions on this procedure using the Regular Copy Basic Features screen, see "Same
Page (Group)," on p. 3-39.
IMPORTANT
• The Finishing modes cannot be set if [Envelopes], [Transparencies], [Tracing Paper], [Labels], [Tab
Paper], or [Washi (JPN paper)] is selected as the paper type.
• If Tray B (Copy Tray-M1) is set as the output tray and a finisher is not attached to the machine, copies
are output in the opposite order to the originals, because they are output face-up. Therefore, change the
output tray for the Copy function to Tray A (center output tray) or Tray C (Copy Tray-N1) in Tray
Designation in Common Settings (from the Additional Functions screen). (See Chapter 4, "Customizing
Settings" in the Reference Guide.)
1
Press [Group].
Press [Collate Not Set] if you do not want to collate the output.
If you want the copies slightly offset vertically in the output tray, press [Offset].
Collate Not Set
Group
Offset
Making a Copy With the Express Copy Basic Features Screen
7
7-27