Selecting the Number of Output Pages
You can enlarge an original in the Poster mode by setting the number of output pages that the
original image should be copied over.
1
Place your originals on the platen glass
If necessary, see the screen shot in step 1 of "Copying" in "Preset Zoom," on p. 3-10.
2
Press [Poster].
If necessary, see the screen shot in step 2 of "Specifying the Copy Ratio in Percentage," on
p. 3-27.
3
Press [Number Of Output Pages]
4
Press [Paper Select].
5
Select the desired paper size
If you select the stack bypass, the screens for specifying the paper size and paper type in the
stack bypass are displayed.
press [Copy Ratio].
[Next].
press [Done].
Changing the Copy (Zoom) Ratio
3
3-29