Viewing The Status Of A Tftp Transfer - Avaya 580 User Manual

Viewing the Status of a TFTP Transfer

Web Agent
Procedure
CLI Command
Document No. 10-300077, Issue 2
After you have copied the startup configuration or other files to a TFTP
server, you can use either the Web Agent or the CLI to check the status of
the TFTP transfer to ensure that files copied correctly.
To view the status of a TFTP transfer using the Web Agent:
1. In the navigation pane, expand the System > Configuration >
Configuration Files folders, and then click File Management.
The Configuration File Management Web page is displayed in the
content pane. See Figure
2. Select Status from the Get Status of Most Recent TFTP Copy field. A
status message displays in the Status pane.
While doing a TFTP transfer using the CLI, the status, either successfully
transferring or an error condition, is immediately returned.
* Note: You cannot view the status of a TFTP transfer done using the
CLI from the Get Status of Most Recent TFTP Copy field on
the Web Agent.
> show startup-config
2-19.
Setting Up the Switch
2-45