Assigning A Trunk Port To A Vlan - HP A6600 Configuration Manual

Layer 2 - lan switching
Hide thumbs Also See for A6600:
Table of Contents

Advertisement

To do...
port group
view
3.
Configure the link type of the
port or ports as access
4.
Assign the current access ports
to a VLAN
Before assigning an access port to a VLAN, create the VLAN first.
In VLAN view, only Layer 2 Ethernet interfaces can be assigned to the current VLAN.

Assigning a trunk port to a VLAN

A trunk port can carry multiple VLANs. Assign it to a VLAN in interface view (including Ethernet interface
view and Layer 2 aggregate interface view) or port group view.
To assign a trunk port to one or multiple VLANs:
To do...
1.
Enter system view
2.
Enter
interface
view or
port group
view
Use the
command...
Enter Layer 2
interface
aggregate
bridge-aggregation
interface view
interface-number
Enter port
port-group manual
group view
port-group-name
port link-type access
port access vlan
vlan-id
Use the command...
system-view
Enter Ethernet
interface interface-type
interface view
interface-number
Enter Layer 2
interface
aggregate
bridge-aggregation
interface view
interface-number
Remarks
view applies only to the current port.
The configuration made in port group view
applies to all ports in the port group.
The configuration made in Layer 2
aggregate interface view applies to the
aggregate interface and its aggregation
member ports. If the system fails to apply
the configuration to the aggregate interface,
it stops applying the configuration to
aggregation member ports. If the system
fails to apply the configuration to an
aggregation member port, it skips the port
and moves to the next member port.
Optional.
By default, the link type of a port is access.
Optional.
By default, all access ports belong to VLAN 1.
Remarks
Required.
Use any command.
The configuration made in Ethernet
interface view applies only to the
current port.
The configuration made in port group
view applies to all ports in the port
group.
The configuration made in Layer 2
aggregate interface view applies to
the aggregate interface and its
aggregation member ports. If the
94

Advertisement

Table of Contents
loading

Table of Contents