HP A6600 Configuration Manual page 197

To do...
8. Configure an SVLAN marking
action to replace the local SVLAN
ID with a foreign SVLAN ID
9. Return to system view
10. Create a QoS policy and enter
QoS policy view
11. Associate the class with the
behavior
Configuring the customer-side port
To configure the customer-side port:
To do...
1. Enter system view
2. Enter Ethernet interface view
3. Configure the port as a trunk port
4. Assign the port to the local SVLANs
5. Apply the uplink policy configured for
the customer-side port to the incoming
traffic
6. Apply the downlink policy configured
for the customer-side port to the
outgoing traffic
Configuring the network-side port
To configure the network-side port:
To do...
1. Enter system view
2. Enter Ethernet interface view
3. Configure the port as a trunk port
4. Assign the port to local SVLANs
Use the command...
remark service-vlan-id vlan-id
quit
qos policy policy-name
classifier tcl-name behavior
behavior-name
Use the command...
system-view
interface interface-type
interface-number
port link-type trunk
port trunk permit vlan { vlan-id-list
| all }
qos apply policy policy-name
inbound
qos apply policy policy-name
outbound
Use the command...
system-view
interface interface-type
interface-number
port link-type trunk
port trunk permit vlan { vlan-id-list
| all }
190
Remarks
CVLAN and SVLAN pair.
Required.
Required.
Repeat this step to create
other class-behavior
associations.
Remarks
—
—
Required.
The default link type of an
Ethernet port is access.
Required.
By default, a trunk port is
in only VLAN 1.
Required.
Required.
Remarks
—
—
Required.
The default link type of an
Ethernet port is access.
Required.
By default, a trunk port is
in only VLAN 1.