Protocols And Standards; Qinq Configuration Task List - HP A6600 Configuration Manual

Table 21 Reserved protocol type values
Protocol type
ARP
PUP
RARP
IP
IPv6
PPPoE
MPLS
IPX/SPX
IS-IS
LACP
802.1X
Cluster
Reserved

Protocols and standards

IEEE 802.1Q: IEEE standard for local and metropolitan area networks: Virtual Bridged Local Area
Networks

QinQ configuration task list

Complete the follows tasks to configure QinQ:
Task
Configuring basic QinQ
Configuring selective QinQ
Configuring the TPID value in VLAN tags
QinQ requires configurations only on the service provider network.
QinQ configurations made in Ethernet interface view take effect on the current interface only. Those
made in Layer 2 aggregate interface view take effect on the current aggregate interface and all member
ports in the aggregation group. Those made in port group view take effect on all member ports in the
current port group.
The basic QinQ and selective QinQ features must be configured on the ports that connect the service
provider network to the customer networks.
Value
0x0806
0x0200
0x8035
0x0800
0x86DD
0x8863/0x8864
0x8847/0x8848
0x8137
0x8000
0x8809
0x888E
0x88A7
0xFFFD/0xFFFE/0xFFFF
Enabling basic QinQ
Configuring VLAN transparent transmission
Configuring an outer VLAN tagging policy
Configuring an inner-outer VLAN 802.1p
priority mapping
Configuring inner VLAN ID substitution
146
Remarks
Required
Optional
Optional
Optional
Optional
Optional