Configuring Group-Specific Load Sharing Criteria; Displaying And Maintaining Ethernet Link Aggregation - HP A6600 Configuration Manual

Layer 2 - lan switching
Hide thumbs Also See for A6600:
Table of Contents

Advertisement

Configuring group-specific load sharing criteria

To configure load sharing criteria for a link aggregation group:
To do...
1.
Enter system view
2.
Enter
aggregate
interface
view
3.
Configure the load
sharing criteria for the
aggregation group
Displaying and maintaining Ethernet link
aggregation
To do...
Display information for an
aggregate interface or multiple
aggregate interfaces
Display the local system ID
Display the global or
group-specific link-aggregation
load sharing criteria
Display detailed link aggregation
information for link aggregation
member ports
Display summary information
about all aggregation groups
Use the command...
system-view
Enter Layer
2
interface bridge-aggregation
aggregate
interface-number
interface
view
Enter Layer
3
interface route-aggregation
aggregate
interface-number
interface
view
link-aggregation load-sharing mode
{ destination-ip | destination-mac
|source-ip | source-mac | per-packet }
Use the command...
display interface [ bridge-aggregation |
route-aggregation ] [ brief [ down ] ] [ | { begin
| exclude | include } regular-expression ]
display interface { bridge-aggregation |
route-aggregation } interface-number [ brief ]
[ | { begin | exclude | include }
regular-expression ]
display lacp system-id [ | { begin | exclude |
include } regular-expression ]
display link-aggregation load-sharing mode
[ interface [ { bridge-aggregation |
route-aggregation } interface-number ] ] [ |
{ begin | exclude | include }
regular-expression ]
display link-aggregation member-port
[ interface-list ] [ | { begin | exclude | include }
regular-expression ]
display link-aggregation summary [ | { begin |
exclude | include } regular-expression ]
Remarks
Use either command.
Required.
By default, the global
link-aggregation load sharing
criteria are applied.
The per-packet keyword is not
available on Layer 2 aggregate
interfaces.
25
Remarks
Available in any
view
Available in any
view
Available in any
view
Available in any
view
Available in any
view

Advertisement

Table of Contents
loading

Table of Contents