Assigning User Ports To A Multicast Vlan; Setting The Maximum Number Of Multicast Vlan Forwarding Entries; [Switcha-Ten-Gigabitethernet1/1/7] Quit - HP 6125XLG Ip Multicast Configuration Manual

Assigning user ports to a multicast VLAN

To configure user ports for a multicast VLAN, you must configure a VLAN as a multicast VLAN, and
assign the desired user ports to the multicast VLAN. You can either assign the user ports to the multicast
VLAN in multicast VLAN view, or assign the user ports to the multicast VLAN in interface view.
When you configure multicast VLAN user ports, follow these guidelines:
The VLAN to be configured as a multicast VLAN must exist.
•
• A port can belong to only one multicast VLAN.
Assigning ports to a multicast VLAN in multicast VLAN view
Step
1. Enter system view.
2. Configure a VLAN as a
multicast VLAN and enter
multicast VLAN view.
3. Assign ports to the
multicast VLAN.
Assigning a port to a multicast VLAN in interface view
Step
1. Enter system view.
2. Configure a VLAN as a
multicast VLAN and enter
its view.
3. Return to system view.
4. Enter interface view.
5. Assign the current port to
the multicast VLAN.
Setting the maximum number of multicast VLAN
forwarding entries
You can set the maximum number of multicast VLAN forwarding entries on the device. When the upper
limit is reached, the device does not create multicast VLAN forwarding entries until some entries age out
or are manually removed.
If the total number of the entries exceeds the upper limit value that you are setting, the system does not
automatically remove existing entries or create new entries. In this case, HP recommends that you remove
extra entries manually.
To set the maximum number of multicast VLAN forwarding entries:
Command
system-view
multicast-vlan vlan-id
port interface-list
Command
system-view
multicast-vlan vlan-id
quit
interface interface-type
interface-number
port multicast-vlan vlan-id
45
Remarks
N/A
By default, a VLAN is not a multicast VLAN.
By default, a multicast VLAN does not have
any user ports.
Remarks
N/A
By default, a VLAN is not a multicast
VLAN.
N/A
N/A
By default, a user port does not belong
to any multicast VLAN.