Configuring Basic Qinq; Enabling Basic Qinq; Configuring Vlan Transparent Transmission - HP A6600 Configuration Manual

Do not configure QinQ on a reflector port. For more information about reflector ports, see Network
Management and Monitoring Configuration Guide.

Configuring basic QinQ

Enabling basic QinQ

A basic QinQ-enabled port tags an incoming packet with its default VLAN tag.
To enable basic QinQ:
To do...
1. Enter system view
2. Enter
interface
view or port
group view
3. Enable basic QinQ

Configuring VLAN transparent transmission

When basic QinQ is enabled on a port, all packets passing through the port are tagged with the port's
default VLAN tag. However, by configuring the VLAN transparent transmission function on a port, you
can specify the port not to add its default VLAN tag to packets carrying specific inner VLAN tags when
they pass through it, so that these packets are transmitted in the service provider network with single tags.
To configure VLAN transparent transmission:
To do...
1. Enter system view
2. Enter
interface
view or
port
group
view
Configure VLAN transparent
3.
transmission on the ports
When configuring transparent transmission for a VLAN, you must configure all devices on the
transmission path to permit packets of this VLAN to pass through.
For VLANs whose packets are to be transparently transmitted through a port, do not configure VLAN
mapping for them on the port. For more information about VLAN mapping, see the chapter "VLAN
mapping configuration."
Enter Ethernet or Layer 2
aggregate interface view
Enter port group view
Use the command...
system-view
Enter Ethernet or
interface interface-type
Layer 2 aggregate
interface-number
interface view
Enter port group
port-group manual port-group-name
view
qinq transparent-vlan vlan-list
Use the command...
system-view
interface interface-type
interface-number
port-group manual
port-group-name
qinq enable
147
Remarks
—
Required.
Use either command.
Required.
Disabled by default.
Remarks
—
Required.
Use either command.
Required.
By default, VLAN transparent
transmission is not
configured.