HP A6600 Configuration Manual page 112

[Router-vlan200] description protocol VLAN for IPv6
[Router-vlan200] port gigabitEthernet 4/1/12
# Create an IPv6 protocol template in the view of VLAN 200, and an IPv4 protocol template in the view
of VLAN 100.
[Router-vlan200] protocol-vlan 1 ipv6
[Router-vlan200] quit
[Router] vlan 100
[Router-vlan100] protocol-vlan 1 ipv4
[Router-vlan100] quit
# Configure port GigabitEthernet 4/1/1 as a hybrid port that forwards packets of VLANs 100 and 200
untagged.
[Router] interface gigabitEthernet 4/1/1
[Router-GigabitEthernet4/1/1] port link-type hybrid
[Router-GigabitEthernet4/1/1] port hybrid vlan 100 200 untagged
Please wait... Done.
# Associate port GigabitEthernet 4/1/1 with the IPv4 protocol template of VLAN 100, and the IPv6
protocol template of VLAN 200.
[Router-GigabitEthernet4/1/1] port hybrid protocol-vlan vlan 100 1
[Router-GigabitEthernet4/1/1] port hybrid protocol-vlan vlan 200 1
[Router-GigabitEthernet4/1/1] quit
# Configure GigabitEthernet 4/1/2 as a hybrid port that forwards packets of VLANs 100 and 200
untagged, and associate GigabitEthernet 4/1/2 with the IPv4 protocol template of VLAN 100, and the
IPv6 protocol template of VLAN 200.
[Router] interface gigabitEthernet 4/1/2
[Router-GigabitEthernet4/1/2] port link-type hybrid
[Router-GigabitEthernet4/1/2] port hybrid vlan 100 200 untagged
Please wait... Done.
[Router-GigabitEthernet4/1/2] port hybrid protocol-vlan vlan 100 1
[Router-GigabitEthernet4/1/2] port hybrid protocol-vlan vlan 200 1
Keep the default settings of L2 Switch A and L2 Switch B.
2.
Configure IPv4 Host A, IPv4 Host B, and IPv4 Server to be on the same IP subnet (for example,
3.
192.168.100.0/24), and configure IPv6 Host A, IPv6 Host B, and IPv6 Server to be on the same IP
subnet (for example, 192.168.200.0/24).
105