Hobart 60CU20 Operation And Maintenance Manual With Illustrated Parts List page 44

OM-2226 / Operation and Maintenance Manual
60CU20 / Series 500062 / 400 Hz. Generator Set
(8) Check the engine lubricating oil level. The oil gauge rod has H high mark and L low-level marks to
indicate the operating lubrication oil supply. Oil level should be kept as near the high mark as
possible, without going over it. See Figure 1 for capacity.
CAUTION
NEVER operate the engine with oil level below the L level mark or above the H level
mark.
NOTE: See the Engine Manufacturer's Operation Maintenance Manual for oil recommendations.
(9) Check the batteries. Inspect the batteries for proper connection of the terminals and check the
electrolyte level (if possible). Service or replace if necessary.
May 2, 2013
Oil Fill Cap
Figure 2: Oil Fill and Oil Level Check Locations
Dip Stick
Chapter 1-2
Page 2