Hobart 60CU20 Operation And Maintenance Manual With Illustrated Parts List page 205

OM-2226 / Operation and Maintenance Manual
60CU20 / Series 500062 / 400 Hz. Generator Set
Unusual Service Conditions
This information is a general guideline and cannot cover all possible conditions of equipment use. The
specific local environments may be dependent upon conditions beyond the manufacturer's control. The
manufacturer should be consulted if any unusual conditions of use exist which may affect the physical
condition or operation of the equipment or safety to surrounding personnel.
Among such conditions are:
1) Exposure to:
a) Combustible, explosive, abrasive or conducting dusts.
b) Environments where the accumulation of lint or excessive dirt will interfere with normal ventilation.
c) Chemical fumes, flammable, or explosive gases.
d) Nuclear radiation.
e) Steam, salt-laden air, or oil vapor.
f) Damp or very dry locations, radiant heat, vermin infestation, or atmospheres conducive to fungus
growth.
g) Abnormal shock, vibration or mechanical loading from external sources during equipment operation.
h) Abnormal axial or side thrust imposed on rotating equipment shafts.
i) Low and/or high ambient temperatures.
j) High electromagnetic fields
2) Operation at:
a) Voltages above or below rated voltage.
b) Speeds other than rated speed.
c) Frequency other than rated frequency.
d) Standstill with rotating equipment windings energized.
e) Unbalanced voltages.
f) Operation at loads greater than rated.
3) Operation where low acoustical noise levels are required.
May 2, 2013 Appendix A
Page 5