Introduction; General; Purpose; Arrangement - Hobart 60CU20 Operation And Maintenance Manual With Illustrated Parts List

60 kva, 3 phase, 115/200 volt, 400 hz. generator set. series 500062
Table of Contents

Advertisement

OM-2226 / Operation and Maintenance Manual
60CU20 / Series 500062 / 400 Hz. Generator Set
Chapter 4 Illustrated Parts List
Section 1

1) General

The Illustrated Parts List identifies, describes, and illustrates main assemblies, subassemblies, and detail
parts of an Engine-Generator Set manufactured by ITW GSE Group, Hobart Ground Systems.

2) Purpose

The purpose of this list is to provide parts identification and descriptive information to maintenance and
provisioning personnel for use in provisioning, requisitioning, purchasing, storing, and issuing of spare
parts.

3) Arrangement

Chapter 4 is arranged as follows:
Section 1 - Introduction
Section 2 - Manufacturer's Codes
Section 3 - Parts List
Section 4 - Numerical index

4) Explanation of Parts List

a) Contents
The parts list contains a breakdown of the equipment into assemblies, subassemblies, and detail
parts. All parts of the equipment are listed except:
Standard hardware items (attaching parts) such as nuts, screws, washers, etc., which are
available commercially
Bulk items such as wire, cable, sleeving, tubing, etc., which are also commercially available
Permanently attached parts, which lose their identity by being welded, soldered, riveted, etc., to
other parts, weldments, or assemblies
b) Parts List Form
This form is divided into six columns. Beginning at the left side of the form and proceeding to the
right, columns are identified as follows:
(1) FIGURE-ITEM NO. Column
This column lists the figure number of the illustration applicable to a particular parts list and also
identifies each part in the list by an item number. These item numbers also appear on the
illustration. Each item number on an illustration is connected to the part to which it pertains by a
leader line. Thus, the figure and item numbering system ties the parts lists to the illustrations and
vice-versa. The figure and index numbers are also used in the numerical index to assist the user
in finding the illustration of a part when the part number is known.
May 2, 2013

Introduction

Chapter 4-1
Page 1

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

500062tr-std500062-std500062-dlx500062tr-dlx

Table of Contents