Edit; View - Extron electronics AXI 22 AT User Manual

Export Single Device — Saves the currently selected device configuration in
5
Device Manager as a configuration file. This can be used to save an individual device
configuration when there are multiple devices in Device Manager (see the Device
Manager topic of the DSP Configurator Help file).
Recent Files — Lists the five most recently opened configuration files. These files can
6
be selected and loaded into DSP Configurator Software.
Exit — Closes DSP Configurator Software. If the current configuration has not
7
been saved, the Save dialog box opens and prompts the user to save the current
configuration before closing the software. Click Yes to save the file. Click No to exit the
application without saving. Click Cancel to return to the main workspace and keep the
software running.

Edit

Cut — Removes the configuration of selected elements
1
in the workspace to be pasted to other elements.
Configuration data is not removed from the elements until it
is pasted to other elements.
Copy — Copies the configuration of selected elements in
2
the workspace to be pasted to other elements.
Paste — Applies the cut or copied configuration of elements to the selected elements
3
in the workspace.

View

Meter Bridge — Opens a meter bridge to view
1
input and output activity. The meter bridge is
a floating window, allowing the user to use the
DSP Configurator Software workspace while
simultaneously monitoring input and output activity.
NOTE: The meter bridge is only available in Live mode.
Re-enable All Dialogs — This option re-enables all dialog boxes that no longer appear
2
based on user selection (certain dialog boxes that appear are user-defeatable by
selecting a checkbox that reads Do Not Show This Dialog Again).
AXI 22 AT and AXI 44 AT • DSP Configurator Software
1
2
3
1
2
12