Command And Response Table For Dsp Sis Commands; Object Id (Oid) Number And Value Range Tables - Extron electronics AXI 22 AT User Manual

Command and Response Table for DSP SIS Commands

Command
Gain/Attenuation
Set gain or attenuation
View gain or
attenuation
NOTE: Input gain can only be set in 3 dB steps. For example, 0, 3, 9, and so on. Values that are not in 3 dB
steps will return an E13 error message.
Mute
Set mute
View mute status
Phantom Power
Set phantom power
View phantom power
Key:
X1)
= Object ID (OID) number
X1!
= Gain value
X1@
= Mute or phantom power status

Object ID (OID) Number and Value Range Tables

Gain values should be entered as an unsigned integer. Attenuation values should be entered
as negative integers.
NOTES:
Gain values range from 0 dB to 42 dB and must be in 3 dB steps. For example: 0,
Attenuation values must be in 1 dB steps.
Input OID
Mic/Line Input 1 40000
Mic/Line Input 2 40001
Mic/Line Input 3 40002
Mic/Line Input 4 40003
ASCII Command
(host to unit)
E X1) X1! }
G * AU
E X1) }
G AU
E X1) X1@ }
M * AU
E X1) }
M AU
E X1) X1@ }
Z * AU
E X1) }
Z AU
3, 6, 9, and so on.
Gain Value Range
0 to 42
0 to 42
0 to 42
0 to 42
Response
(unit to host)
X1) X1!]
DsG *
X1) X1!]
*
X1) X1@]
DsM *
X1) X1@]
*
X1) X1@]
DsZ *
X1) X1@]
*
See Object ID (OID) Number and Value Range
Tables below for Input and Output OID numbers.
See Object ID (OID) Number and Value Range
Tables below for acceptable Input and Output gain
value ranges.
1 = on, 0 = off (default)
Output OID
Output 1 60000
Output 2 60001
Output 3 60002
Output 4 60003
AXI 22 AT and AXI 44 AT • Remote Control
Additional Description
X1) X1!]
DsG *
(verbose 2 and 3 response)
X1) X1@]
DsM *
(verbose 2 and 3 response)
Phantom power is only
available for inputs.
X1) X1@]
DsZ *
(verbose 2 and 3 response)
Attenuation Value
Range
0 to -100
0 to -100
0 to -100
0 to -100
35