Figure 12-4 Closing the Paper Compartment
Removing the Paper Roll from the Printer
To remove an empty roll of thermal paper from the
printer:
1. Place the terminal on a flat, stable surface.
2. Insert
two
fingers
compartment cover, beneath the release latch.
3. Pull the latch up until the cover unlocks.
4. Lift the paper compartment cover until it is fully open, as
illustrated in Figure 12-1 "Opening the Paper Compartment"
on page 26.
5. Lift the paper roll with its spindle out of the paper
compartment.
28
NURIT 8000
into
the
recess
on
the
Installation Manual
paper