VeriFone NURIT 8000 Installation Manual page 51

NURIT 8000
The printer continues to operate when out of paper
1. Verify that the paper sensor of the printer mechanism (inside the
paper roll compartment) is not blocked by paper or debris.
2. If the problem persists,
representative.
The magnetic card reader does not function properly
1. Verify that the card has been swiped with its magnetic stripe at
the bottom and facing the user. See Figure A-1 on page 42.
2. Swipe the magnetic card in the opposite direction.
3. If possible, try using a different magnetic card.
4. If the problem persists,
representative.
The Smart Card reader does not function properly
1. Verify that the chip end of the Smart Card is fully inserted with
chip side up. See Figure B-1 on page 43.
2. If possible, try using a different Smart Card.
3. If the problem persists,
representative.
Installation Manual
contact an authorized service
contact an authorized service
contact an authorized service
43