12. Loading Paper in the Printer
The printer of this device uses thermal paper only. Use
of low-quality paper may damage the printer and/or
cause it to malfunction.
For further details regarding printer paper, contact
your VeriFone representative or service provider.
To load a roll of thermal paper in the printer:
1. Place the terminal on a flat, stable surface.
2. Insert
two
fingers
compartment cover, beneath the release latch.
3. Pull the latch up until the cover unlocks.
4. Lift the paper compartment cover until it is fully open.
1
Figure 12-1 Opening the Paper Compartment
1
Lifting the release latch
5. Remove the tape strip from a new paper roll.
6. Unroll approximately 5 cm (2 in) of paper to facilitate the
loading process.
26
NURIT 8000
Caution
into
the
recess
on
the
2
Opening
the
2
compartment cover
Installation Manual
paper
paper