VeriFone NURIT 8000 Installation Manual page 50

Operation with a peripheral device is not successful
1. Verify that the peripheral device is properly connected to the
terminal.
2. Try to verify whether the peripheral device is functioning properly.
3. Replace the cable or the adapter cable being used with the
peripheral device.
4. If the problem persists,
representative.
The printer does not function properly
1. Recharge or replace the battery.
2. If the problem persists, connect the terminal to the AC power
outlet using the AC/DC Power Adapter.
3. Verify that the AC/DC Power Adapter is connected properly to the
AC power outlet and that its barrel plug mates with the power
jack on the front panel of the terminal. Verify that the LCD display
is lit.
4. Verify that the paper roll compartment cover is fully and securely
closed.
5. Open the paper roll compartment cover and check whether the
paper roll has been used up. If it has, replace the thermal paper
roll.
6. Verify the paper roll and spindle are correctly installed.
7. Verify that the paper has been fed to the printer from the bottom
of the paper roll.
8. Verify that the paper is not jammed or damaged. If it is, reload
the paper.
9. If the problem persists,
representative.
42
NURIT 8000
contact an authorized service
contact an authorized service
Installation Manual