Loading A Paper Roll In The Printer - VeriFone Carbon 8 Installation Manual

Loading a Paper
Roll in the
Printer
NOTE
CAUTION
To install a paper roll
Before you can process transactions that require a receipt, you must install paper
in the printer.
The Carbon 8 Printer Module uses a roll of 80 mm x 80 mm, single-ply, thermal-
sensitive paper.
A pink out-of-paper indicator line appears on the edge of the paper before the end
of the roll. After this line appears, there is enough paper remaining on the roll to
conclude at least one more transaction.
When the LED by the printer door blinks amber, this indicates the printer is out of
paper.
Poor-quality paper can jam the printer and create excessive paper dust. To order
high-quality Verifone paper, refer to
Store thermal paper in a dry, dark area. Handle thermal paper carefully: impact,
friction, temperature, humidity, and oils affect the color and storage
characteristics of the paper.
Never load a roll of paper with folds, wrinkles, tears, or holes at the edges.
1
Hold the Carbon 8 with one hand and slide the printer module off the base of
the terminal. (see Figure
Figure 6 Removing the Printer Module
2
Remove any partial roll of paper in the tray.
3
Loosen the glued leading edge of the new paper roll or remove the protective
strip. Unwind the paper roll past any glue residue.
4
Hold the roll so the paper feeds from the top of the roll.
Accessories and
6).

Loading a Paper Roll in the Printer

Documentation.
C 8 I G
ARBON NSTALLATION UIDE
S
ETUP
19