SAM, SIM, and SD/MMC Card Configurations
The configuration of the SAM, SIM, and SD/MMC cards are
model dependent, based off of what has been enabled of your
model of the terminal. If one or more of the slots are disabled in
your model, the slot is inaccessible.
Figure 14-1 SAM, SIM, and SD/MMC Cards Configurations
Card Slot
•
2 SAM slots, labelled SAM1 and SAM2
SAM
•
Card configuration may be: 0/1/2
•
1 SIM card slot, accessible only if your terminal
model is GPRS enabled
SIM
•
Card configuration may be: 0/1
•
1 SD/MMC card slot
SD/MMC
•
Card configuration may be: 0/1
Installing a SAM or SIM Card
To install a SAM or SIM card:
1. Remove
the
battery-SAM-SIM-SD/MMC
cover,
as
described
Battery-SAM-SIM-SD/MMC Compartment Cover" on page 19.
2. If necessary, remove the battery, as described on page 21.
3. Slide the SAM or SIM cardholder locking-clasp in the
direction indicated by the engraved arrow to the OPEN
position.
32
NURIT 8000
SIM
SD/MMC
SAM2
SAM1
Availability
compartment
in
"Removing and Replacing the
Installation Manual