External Wiring Installation (Continued); Back Side Of The Combustor Temp Display - FireplaceXtrordinair 42 Apex Clean Face Installation Manual

External Wiring Installation (continued)


Connect the thermocouple wire (2-wire) to the thermocouple connection (see picture below).

Connect the power/GreenStart™ wire (4-wire) to the power/GreenStart™ connection (see picture
below).
CELSIUS DISPLAY
If you wish to display Celsius instead of Fahrenheit, place the jumper over the 2 pins on the back of the
circuit board (see picture below).

Back Side of the Combustor Temp Display

Thermocouple Wire Connection
Power / GreenStart™ Connection
© Travis Industries
Installation
(for qualified installers only)
8/24/2017 - 1450
Celsius Pins and Jumper
41
42 Apex CF