Table of Contents
Advertisement
40
External Wiring Installation
Make sure the household breaker serving the fireplace is shut off prior to working on any electrical lines.
Determine a location for the rheostat and combustor temp. display. Place it in a location that may be
reached by the 20' harness exiting the right side of the fireplace. Mount the included double-gang
junction box in this location.
Route the wire harness from the fireplace to the junction box. Do not route the wire over the top of the
fireplace or within 2" of the chimney.
Route an approved electrical line (e.g. Romex® wire) from the fireplace junction box to the rheostat.
Do not route the wire over the top of the fireplace or within 2" of the chimney.
© Travis Industries
Installation
(for qualified installers only)
8/24/2017 - 1450
Romex(r) (or similar) Wire
Cover Plate
(included)
Combustor Temp. Display
(& GreenStart Button)
Power In
NOT INCLUDED
Combustor Temp. Display
Harness (included)
Junction Box
Rheostat
42 Apex CF
Advertisement
Table of Contents
