Table of Contents
Advertisement
Stretch the included 5" aluminum flex duct to its full length. Cut sections of the duct to the proper
length to reach from the lower to upper manifold collars. Secure each section of duct to the manifold
collars with 3 SD screws. Seal the ducting with aluminum (U.L. 181A-P) tape.
Upper Manifold and Trim Dimensions
The upper manifold trim may be installed over the facing to provide an aesthetic opening for the
convection outlet. (2) 8-32 x 1-1/2" screws are included to attach the trim to the upper manifold. This
allows variable thickness of finish material.
b
Dimensions
a
41-15/16"
© Travis Industries
Installation
(for qualified installers only)
Self-Drilling
Screw
a
b
c
3-1/2"
1-5/16"
10/18/2017 - 1450
e
d
c
d
40"
f
e
f
1-11/16"
2-1/4"
42 Apex CF
35
Advertisement
Table of Contents
