Air Cooled Chimney – Use of Offsets in Chase
When using offsets inside the chase the offsets will need to be angled back slightly to allow the
chimney to clear the upper manifold (see illustration below). In most installations this offset will need
to be angled back 1-1/2".
Make sure to maintain the minimum 2" clearance from the pipe to combustibles.
© Travis Industries
Installation
0" Clearance to
Upper/Lower Manifold
Upper Manifold
8/24/2017 - 1450
(for qualified installers only)
Offsets
Top View
1-1/2"
Upper Manifold
23
42 Apex CF