Enabling Dhcp Snooping - Dell S3048-ON Configuration Manual

Enabling DHCP Snooping

To enable DHCP snooping, use the following commands.
1 Enable DHCP snooping globally.
CONFIGURATION mode
ip dhcp snooping
2 Specify ports connected to DHCP servers as trusted.
INTERFACE mode
INTERFACE PORT EXTENDER mode
ip dhcp snooping trust
3 Enable DHCP snooping on a VLAN.
CONFIGURATION mode
ip dhcp snooping vlan name
Enabling IPv6 DHCP Snooping
To enable IPv6 DHCP snooping, use the following commands.
1 Enable IPv6 DHCP snooping globally.
CONFIGURATION mode
ipv6 dhcp snooping
2 Specify ports connected to IPv6 DHCP servers as trusted.
INTERFACE mode
ipv6 dhcp snooping trust
3 Enable IPv6 DHCP snooping on a VLAN or range of VLANs.
CONFIGURATION mode
ipv6 dhcp snooping vlan vlan-id
Adding a Static Entry in the Binding Table
To add a static entry in the binding table, use the following command.
• Add a static entry in the binding table.
EXEC Privilege mode
ip dhcp snooping binding mac
Adding a Static IPV6 DHCP Snooping Binding Table
To add a static entry in the snooping database, use the following command.
• Add a static entry in the snooping binding table.
EXEC Privilege mode
256 Dynamic Host Configuration Protocol (DHCP)