Dell S3048-ON Configuration Manual page 969

ip address ip—address mask
A non-default VRF named VRF-Shared is created and the interface 1/4 is assigned to this VRF.
2 Configure the export target in the source VRF:.
ip route-export 1:1
3 Configure VRF-red.
ip vrf vrf-red
interface-type slot/port
ip vrf forwarding VRF-red
ip address ip—address mask
A non-default VRF named VRF-red is created and the interface is assigned to this VRF.
4 Configure the import target in VRF-red.
ip route-import 1:1
5 Configure the export target in VRF-red.
ip route-export 2:2
6 Configure VRF-blue.
ip vrf vrf-blue
interface-type slot/port
ip vrf forwarding VRF-blue
ip address ip—address mask
A non-default VRF named VRF-blue is created and the interface 1/12 is assigned to it.
7 Configure the import target in VRF-blue.
ip route-import 1:1
8 Configure the export target in VRF-blue.
ip route-import 3:3
9 Configure VRF-green.
ip vrf vrf-green
interface-type slot/port
ip vrf forwarding VRF-green
ip address ip—address mask
A non-default VRF named VRF-green is created and the interface is assigned to it.
10 Configure the import target in the source VRF VRF-Shared for reverse communication with VRF-red and VRF-blue.
ip vrf vrf-shared
ip route—import 2:2
ip route-import 3:3
The show run output for the above configuration is as follows:
ip vrf VRF-Red
ip route-export
ip route-import
!
2:2
1:1
Virtual Routing and Forwarding (VRF) 969