Mib Support For Lag - Dell S3048-ON Configuration Manual

MIB Support for LAG

Dell Networking provides a method to retrieve the configured LACP information (Actor and Partner). Actor (local interface) is to designate
the parameters and flags pertaining to the sending node, while the term Partner (remote interface) is to designate the sending node's view
of its peer parameters and flags. LACP provides a standardized means for exchanging information, with partner systems, to form a link
aggregation group (LAG). The following table lists the related MIB objects:
Table 83. MIB Objects for LAG
MIB Object
lagMIB
lagMIBObjects
dot3adAgg
dot3adAggTable
dot3adAggEntry
dot3adAggMACAddress
dot3adAggActorSystemPriority
dot3adAggActorSystemID
dot3adAggAggregateOrIndividual
dot3adAggActorAdminKey
dot3adAggActorOperKey
dot3adAggPartnerSystemID
dot3adAggPartnerSystemPriority
dot3adAggPartnerOperKey
dot3adAggCollectorMaxDelay
788 Simple Network Management Protocol (SNMP)
OID
1.2.840.10006.300.43
1.2.840.10006.300.43.1
1.2.840.10006.300.43.1.1
1.2.840.10006.300.43.1.1.1
1.2.840.10006.300.43.1.1.1.1
1.2.840.10006.300.43.1.1.1.1.1
1.2.840.10006.300.43.1.1.1.1.2
1.2.840.10006.300.43.1.1.1.1.3
1.2.840.10006.300.43.1.1.1.1.4
1.2.840.10006.300.43.1.1.1.1.5
1.2.840.10006.300.43.1.1.1.1.6
1.2.840.10006.300.43.1.1.1.1.7
1.2.840.10006.300.43.1.1.1.1.8
1.2.840.10006.300.43.1.1.1.1.9
1.2.840.10006.300.43.1.1.1.1.10
Description
Contains information about link aggregation
module for managing 802.3ad.
Contains information about every
Aggregator that is associated with a system.
Contains a list of Aggregator parameters and
indexed by the ifIndex of the Aggregator.
Contains a six octet read–only value carrying
the individual MAC address assigned to the
Aggregator.
Contains a two octet read–write value
indicating the priority value associated with
the Actor's system ID.
Contains a six octet read–write MAC
address value used as a unique identifier for
the system that contains the Aggregator.
Contains a read–only boolean value (True or
False) indicating whether the Aggregator
represents an Aggregate or an Individual link.
Contains a 16–bit read–write value which is
the current administrative key.
Contains a 16–bit read–write value which is
the operational key.
Contains a six octet read–only MAC address
value consisting of an unique identifier for
the current Protocol partner of the
Aggregator.
Contains a two octet read–only value that
indicates the priority value associated with
the Partner's system ID.
Contains the current operational value of the
key for the Aggregator's current protocol
partner.
Contains a 16–bit read–write attribute
defining the maximum delay, in tens of