Gmrp - Siemens SCALANCE XM-400 Configuration Manual

The page contains the following boxes:
● IGMP Snooping
Enable or disable IGMP snooping (Internet Group Management Protocol). The function
activates IGMP snooping on all interfaces. if the function is enabled, the multicast addresses
learned with IGMP snooping are entered in the multicast filter table.
● IGMP Snooping Aging Time [s]
In this box, enter the value for the aging time in seconds. As default, 300 seconds is set.
Range of values: 130 - 1225 seconds
● IGMP Querier
Enable or disable "IGMP Querier". The device sends IGMP requests cyclocally.
Steps in configuration
1. Select the "IGMP Snooping" check box.
2. Enter the value for the aging time in seconds in the "IGMP Snooping Aging Time" box.
3. Select the "IGMP Querier" check box.
4. Click the "Set Values" button.
5.5.17.3

GMRP

Activating GMRP
On this page, you specify whether or not GMRP is used for each individual port. If "GMRP" is
disabled for a port, no registrations are made for it and it cannot send GMRP frames.
For GMRP to work, you need to enable the function globally and on the ports.
SCALANCE XM-400/XR-500 Web Based Management (WBM)
Configuration Manual, 05/2017, C79000-G8976-C248-12
Configuring with Web Based Management
5.5 The "Layer 2" menu
325