Configuring with Web Based Management
5.5 The "Layer 2" menu
● DSCP codes 56 - 63 → Queue 8
Steps in configuration
1. For each value in the "DSCP" column, select the forwarding queue from the "Queue" drop-
down list.
2. Click the "Set Values" button.
5.5.2.3
QoS Trust
Specifying the subnet priority
On this page you can set the method according to which frames to be forwarded are prioritized
port by port.
Description of the displayed values
Table 1 has the following columns:
● Port
Shows that the setting is valid for all ports of table 2.
● Trust Mode
Select the setting from the drop-down list. You have the following setting options:
– No Trust
– Trust COS
– Trust DSCP
– Trust COS-DSCP
– No Change
● Copy to Table
If you click the button, the setting is adopted for all ports of table 2.
252
Table 2 remains unchanged.
SCALANCE XM-400/XR-500 Web Based Management (WBM)
Configuration Manual, 05/2017, C79000-G8976-C248-12