Relay Agent Information - Siemens SCALANCE XM-400 Configuration Manual
Industrial ethernet switches
Hide thumbs
Also See for SCALANCE XM-400:
- Configuration manual (960 pages) ,
- Operating instructions manual (80 pages) ,
- Instructions manual (60 pages)
Table of Contents
Advertisement
Deleting a DHCP option
1. Enable the "Select" check box in the row to be deleted.
Repeat this for all entries you want to delete.
2. Click the "Delete" button.
The entry is deleted.
5.4.9.6
Relay Agent Information
On this page you define that devices with a certain remote ID and circuit ID are assigned the
IPv4 addresses from a specific address band.
If you create such an entry for an address band, the ports of the address band only react to
DHCP queries via a DHCP relay agent (option 82). You can create further address bands for
the same IP interfaces so that ports react to different requests.
Description
The page contains the following boxes:
● Pool ID
Select the required IPv4 address band.
● Remote ID
Enter the remote ID.
● Circuit ID
Enter the circuit ID.
The table has the following columns:
● Select
Select the check box in the row to be deleted.
● Pool ID
Shows the number of the IPv4 address band.
SCALANCE XM-400/XR-500 Web Based Management (WBM)
Configuration Manual, 05/2017, C79000-G8976-C248-12
Configuring with Web Based Management
5.4 The "System" menu
183
Advertisement
Table of Contents
