5.4.16.3
Redundancy
On this page, you configure whether or not an error message is triggered if there is a status
change on a redundant connection.
Setting
● Redundancy loss (HRP only)
Enable or disable connection monitoring. If the redundancy of the connection is lost, an
error is signaled.
5.4.17
PROFINET
Settings for PROFINET
On this page, you configure the mode of PROFINET.
SCALANCE XM-400/XR-500 Web Based Management (WBM)
Configuration Manual, 05/2017, C79000-G8976-C248-12
Configuring with Web Based Management
5.4 The "System" menu
225