Emergency Stop; Operation From Ground; Auxiliary Controls; Operation From Platform - Genie Z-34/22 Operator's Manual

Sixth Edition • First Printing

Emergency Stop

Push in the red Emergency Stop button to the off
position at the ground or platform controls to stop
all machine functions.
Repair any function that operates when the red
Emergency Stop button is pushed in.
Selecting and operating the ground controls will
override the platform Red Emergency Stop button.

Auxiliary Controls

Use auxiliary power if the primary power source
fails.
1 Be sure that both battery packs are connected
before operating the machine.
2 Turn the key switch to ground or platform
control.
3 Pull out the red Emergency Stop button to the
on position.
4 Press down the foot switch when operating the
auxiliary controls from the platform.
5 CE models: Break the security tie and lift the
cover.
Note: If the security tie is broken or missing,
consult the appropriate Genie service manual.
6 Simultaneously hold the auxiliary
power switch on and activate the
desired function.
The boom, steer and drive functions will operate
with auxiliary power.
Part No. 1258814

Operation from Ground

1 Be sure both battery packs are connected
before operating the machine.
2 Turn the key switch to ground control.
3 Pull out the red Emergency Stop button to
the on position.
To Position Platform
1 Hold the function enable switch to
either side.
2 Move the appropriate toggle switch according to
the markings on the control panel.
Drive and steer functions are not available from the
ground controls.

Operation from Platform

1 Be sure that both battery packs are connected
before operating the machine.
2 Turn the key switch to platform control.
3 Pull out both ground and platform red
Emergency Stop buttons to the on position.
To Position Platform
1 Set the boom function speed controller to the
desired speed.
Note: Drive and steer functions are not affected by
the boom function speed controller.
2 Press down the foot switch.
3 Move the appropriate toggle switch according to
the markings on the control panel.
Z-34/22 • Z-34/22N
Operator's Manual
OPERATING INSTRUCTIONS
25