Controls; Platform Control Panel - Genie Z-34/22 Operator's Manual

Operator's Manual

Controls

4
3
DRIVE
ENABLE
OPERATION
2
Light on indicates that boom
has moved past a non-steer
tire and drive function is
turned off.
To drive, hold drive enable
switch up or down and
slowly move drive control
handle. Machine may drive
in opposite direction that
the drive and steer controls
are moved.
Use color-coded direction
arrows on this panel and
drive chassis to identify the
direction machine will travel.
1
19

Platform Control Panel

1 Drive enable switch
2 Drive enable indicator light
3 ANSI/CSA models:Auxiliary power switch
CE models:Auxiliary power switch with cover
4 Platform level switch
5 Horn button
6 Primary boom extend/retract switch
7 Red Emergency Stop button
8 Function override - Aircraft protection package
(if equipped)
9 Battery charge indicator and/or low voltage
interrupt (option)
10
6 7
5 8
STOP
18 17 16 13
Z-34/22 • Z-34/22N
9
10
F
1
2
E
CREEP
15 14
20
10 Machine not level indicator light (if equipped)
11 Proportional control handle for drive function and
thumb rocker for steer function
12 Platform overload indicator light (if equipped)
13 Boom function speed controller
14 Jib boom up/down switch
15 Secondary boom up/down switch
16 Primary boom up/down switch
17 Turntable rotate switch
18 Platform rotate switch
19 Not used
Sixth Edition • First Printing
20
Part No. 1258814
11
12
20
20
20