Test The Drive Enable System; Test The Lift/Drive Select Function - Genie Z-34/22 Operator's Manual

Operator's Manual
FUNCTION TESTS

Test the Drive Enable System

34 Press down the foot switch and retract the
primary boom to the stowed position.
35 Rotate the turntable until the boom moves past
one of the non-steer wheels.
Result: The drive enable
indicator light should come on
and remain on while the
boom is anywhere in the
range shown.
36 Move the drive control handle off center.
Result: The drive function should not operate.
37 Hold the drive enable toggle switch up or down
and slowly move the drive control handle off
center.
Result: The drive function should operate.
Note: When the drive enable system is in use, the
machine may drive in the opposite direction that the
drive and steer control handle is moved.
Use the color-coded direction
arrows on the platform controls
and the drive chassis to
identify the direction of travel.
22

Test the Lift/Drive Select Function

(if equipped)
38 Press down the foot switch.
39 Move the drive control handle off center and
Blue
Yellow
Z-34/22 • Z-34/22N
Sixth Edition • First Printing
activate a boom function toggle switch.
Result: No boom functions should operate. The
machine will move in the direction indicated on
the control panel.
Part No. 1258814