Check The Batteries; Check The Tire Pressure; Standard Batteries - Genie Z-34/22 Operator's Manual

Operator's Manual
MAINTENANCE

Check the Batteries

Proper battery condition is essential to good
machine performance and operational safety.
Improper fluid levels or damaged cables and
connections can result in component damage and
hazardous conditions.
Electrocution/burn hazard. Contact
with hot or live circuits could result
in death or serious injury. Remove
all rings, watches and other
jewelry.
Bodily injury hazard. Batteries
contain acid. Avoid spilling or
contacting battery acid. Neutralize
battery acid spills with baking soda
and water.
Perform this test after fully
charging the batteries.
1 Put on protective clothing and eye wear.
2 Be sure that the battery cable connections are
tight and free of corrosion.

Standard Batteries

3 Remove the battery vent caps.
4 Check the battery acid level. If necessary,
replenish with distilled water to the bottom of
the battery fill tube. Do not overfill.
5 Install the vent caps.
16

Check the Tire Pressure

To safeguard maximum stability, achieve
optimum machine handling and minimize tire
wear, it is essential to maintain proper pressure
in all air-filled tires.
1 Check each tire with an air pressure gauge and
add air as needed.
Tire pressure
Industrial tire
Z-34/22 • Z-34/22N
Sixth Edition • First Printing
This procedure does not need
to be performed on machines
equipped with the foam-filled or
solid tires.
Bodily injury hazard. An over-
inflated tire can explode and may
cause death or serious injury.
Tip-over hazard. Do not use
temporary flat tire repair products.
100 psi
Part No. 1258814
6.89 bar