User Constant Tables; A: Setup Settings - YASKAWA CIMR-F7A Instruction Manual

User Constant Tables

A: Setup Settings

The following settings are made with the environment constants (A constants): Language displayed on the
Digital Operator, access level, control method, initialization of constants.
Initialize Mode: A1
User constants for the environment modes are shown in the following table.
Con-
stant
Number
Language
selection for
A1-00 Digital
Operator
display
Constant
A1-01
access level
Control
A1-02 method
selection
-8
5
Name Description
Used to select the language
displayed on the Digital
Operator (LED).
0: English
1: Japanese
2: German
3: French
4: Italian
5: Spanish
6: Portuguese
This constant is not initial-
ized by the initialize opera-
tion.
Used to set the constant
access level (set/read.)
0: Monitoring only
(Monitoring drive mode
and setting A1-01 and
A1-04.)
1: Used to select user
constant
(Only constants set in
A2-01 to A2-32 can be
read and set.)
2: Advanced
(Constants can be read
and set in both quick
programming mode and
advanced programming
(A) mode.)
Used to select the control
method for the Inverter
0: V/f control
1: V/f with PG
2: Open loop vector
3: Flux vector
This constant is not initial-
ized by the initialize opera-
tion.
Control Methods
Change
Setting Factory during
Range Setting Opera-
V/f
tion
0 to 6 1 Yes A
0 to 2 2 Yes A
0 to 2
0 No Q
0 to 3
MEMO
Open
BUS
V/f Flux Page
Loop
Regis-
with Vec-
Vec-
ter
PG tor
tor
A A A 100H -
4-17
A A A 101H
6-155
4-5
Q Q Q 102H 4-7
4-18