YASKAWA CIMR-F7A Instruction Manual page 435

Type
Built-in PG
(con- Speed
nect to Con-
con- trol
nector) Boards
Built-in Com-
(con- muni-
nected cations
to con- Option
nector) Boards
-8
9
Table 9.5 Option Boards (Continued)
Code Num-
Name
ber
• Used for V/f control with PG and flux vector control.
• A-, B-phase input (complimentary input)
73600-
• Maximum input frequency: 32767 Hz
PG-B2
A013X
• Pulse monitor output: Open-collector
(PG power supply output: +12 V, 200 mA max.)
• Differential input.
• A-phase pulse (differential pulse) input, for V/f control
73600- • Maximum input frequency: 300 kHz
PG-D2
A014X • Input: Conforms to RS-422
• Pulse monitor output: RS-422
(PG power supply output: +5 or +12 V, 200 mA max.)
• A-, B-, Z-phase pulse (differential pulse) input
• Maximum input frequency: 300 kHz
73600-
PG-X2 • Input: Conforms to RS-422
A015X
• Pulse monitor output: RS-422
DeviceNet
Used to communicate with an Inverter from a host computer
Communica-
73600- using DeviceNet communications to start/stop Inverter opera-
tions Inter-
C021X tion, read/set parameters, and read/set monitor constants (out-
face Board
put frequencies, output currents, etc.).
SI-N1
ProfiBus-DP
Used to communicate with an Inverter from a host computer
Communica-
73600- using ProfiBus-DP communications to start/stop Inverter
tions Inter-
C033X operation, read/set parameters, and read/set monitor constants
face Board
(output frequencies, output currents, etc.).
SI-P1
InterBus-S
Used to communicate with an Inverter from a host computer
Communica-
using InterBus-S communications to start/stop Inverter opera-
tions Inter- *
tion, read/set parameters, and read/set monitor constants (out-
face Board
put frequencies, output currents, etc.).
SI-R
CANopen
Used to communicate with an Inverter from a host computer
Communica-
using CANopen communications to start/stop Inverter opera-
tions Inter- *
tion, read/set parameters, and read/set monitor constants (out-
face Board
put frequencies, output currents, etc.).
SI-S
CC-Link
Used to communicate with an Inverter from a host computer
Communica-
73600- using CC-Link communications to start/stop Inverter opera-
tions Inter-
C032X tion, read/set parameters, and read/set monitor constants (out-
face Board
put frequencies, output currents, etc.).
SI-C
L W
ON ORKS
Used to communicate with an Inverter from a host computer
Communica-
73600- using L
tions Inter-
C035X operation, read/set parameters, and read/set monitor constants
face Board
(output frequencies, output currents, etc.).
SI-J
L W Used to communicate with an Inverter from a host computer
ON ORKS
Communica- using L
73600-
tions Inter- operation, read/set parameters, and read/set monitor constants
C034X
face Board (output frequencies, output currents, etc.).
SI-W1 With Display Data Channel (DDC) function.
Function
(PG power supply output: +5 or +12 V, 200 mA max.)
W communications to start/stop Inverter
ON ORKS
W communications to start/stop Inverter
ON ORKS
Document
Number
TOE-C736-
40.2
TOE-C736-
40.3
TOE-C736-
40.4
-
-
-
-
-
-
-