Clear Commands - Alcatel-Lucent 7450 Configuration Manual

Show, Clear, Monitor, and Debug Command Reference
ip-prefix-list
Syntax ip-prefix-list [prefix-list-name]
ip-prefix-list prefix-list-name references
Context show>filter>match-list
Description
This command displays IPv4 prefixes information for match criteria in IPv4 ACL and CPM filter
policies.
Parameters
prefix-list-name — A string of up to 32 characters of printable ASCII characters. If special
ipv6-prefix-list
Syntax ipv6-prefix-list [prefix-list-name]
ipv6-prefix-list prefix-list-name references
Context show>filter>match-list
Description This command displays IPv6 prefixes information for match criteria in IPv6 ACL and CPM filter
policies. This command only applies to the 7750 SR.
Parameters
prefix-list-name — A string of up to 32 characters of printable ASCII characters. If special
port-list
Syntax port-list [port-list-name]
port-list port-list-name references
Context show>filter>match-list
Description
This command displays TCP/UDP/SCTP port values or ranges for match criteria in IPv4 and IPv6
ACL and CPM filter policies.
Parameters port-list-name — A string of up to 32 characters of printable ASCII characters. If special

Clear Commands

ip
Syntax ip filter-id [entry entry-id] [ingress | egress]
642
characters are used, the string must be enclosed within double quotes.
characters are used, the string must be enclosed within double quotes.
characters are used, the string must be enclosed within double quotes.
Router Configuration Guide