Alcatel-Lucent 7450 Configuration Manual page 124

IP Router Configuration Command Reference
Parameters ip-address — The IP address of the IP interface.
black-hole
Syntax [no] black-hole
Context config>router>static-route-entry
Description
This command specifies that the route is a black hole route. If the destination address on a packet
matches this static route, it will be silently discarded.
Default no black-hole
bfd-enable
Syntax [no] bfd-enable
Context config>router>static-route-entry>next-hop
Description
This command associates the static route state to a BFD session between the local system and the
configured nexthop.
The remote end of the BFD session must also be configured to originate or accept the BFD session
controlling the static route state.
The no form of this command removes the association of the static route state to that of the BFD
session.
Default no bfd-enable
community
Syntax [no] community comm-id
Context config>router>static-route-entry>next-hop
config>router>static-route-entry>indirect
Description
This configuration option associates a BGP community with the static route. The community can be
matched in route policies and is automatically added to BGP routes exported from the static route.
The no form of this command removes the community association.
Default
no community
124
Values
ipv4-address
ipv6-address
a.b.c.d
x:x:x:x:x:x:x:x-[interface]
Router Configuration Guide