Deleting A Logical Ip Interface - Alcatel-Lucent 7450 Configuration Manual

Service Management Tasks
The following example displays the interface configuration:
A:ALA-A>config>router# info
#------------------------------------------
# IP Configuration
#------------------------------------------
#------------------------------------------
A:ALA-A>config>router#

Deleting a Logical IP Interface

The no form of the interface command typically removes the entry, but all entity associations
must be shut down and/or deleted before an interface can be deleted.
Step 1. Before an IP interface can be deleted, it must first be administratively disabled with
Step 2. After the interface has been shut down, it can then be deleted with the no interface
CLI Syntax:
Example:
86
interface "system"
address 10.0.0.103/32
exit
interface "to-sr1"
address 10.0.0.25/24
port 1/1/2
exit
router-id 10.10.0.3
the shutdown command.
command.
config>router
no interface ip-int-name
config>router# interface test-interface
config>router>if# shutdown
config>router>if# exit
config>router# no interface test-interface
config>router#
Router Configuration Guide