Command Descriptions; Show Commands - Alcatel-Lucent 7450 Configuration Manual

Show, Clear, and Debug Command Reference

Command Descriptions

Show Commands

The following command outputs are examples only; actual displays may differ depending on
supported functionality and user configuration.
aggregate
Syntax aggregate [family] [active]
Context show>router
Description
This command displays aggregate routes.
Parameters
family — Specifies to display IPv4 or IPv6 aggregate routes.
active — When the active keyword is specified, inactive aggregates are filtered out.
Output
Sample Output
*A:CPM133>config>router# show router aggregate
===============================================================================
Aggregates (Router: Base)
===============================================================================
Prefix
-------------------------------------------------------------------------------
10.0.0.0/8
-------------------------------------------------------------------------------
No. of Aggregates: 1
===============================================================================
*A:CPM133>config>router#
arp
Syntax arp [ip-int-name | ip-address/mask | mac ieee-mac-address | summary] [local | dynamic |
static | managed]
Context show>router
236
Values ipv4, ipv6
Summary
NextHop
False
Aggr IP-Address Aggr AS
AS Set State
Community NextHopType
0.0.0.0 0
False Inactive
100:33 Blackhole
Router Configuration Guide