Alcatel-Lucent 7450 Configuration Manual page 603

Description
-------------------------------------------------------------------------------
Filter Match Criteria
-------------------------------------------------------------------------------
No Match Criteria Found
===============================================================================
*B:TechPubs>config#
dhcp6
Syntax dhcp6 [filter-id]
Context show>filter
Description
This command displays DHCP6 filter information.
Parameters filter-id — Displays detailed information for the specified filter ID and its filter entries.
ip
Syntax ip [filter-type filter-type]
ip embedded [inactive]
ip ip-filter-id embedded [inactive]
ip ip-filter-id [detail]
ip ip-filter-id associations
ip ip-filter-id type entry-type
ip ip-filter-id counters [type entry-type][detail]
ip ip-filter-id entry entry-id [counters]
Context show>filter
Description
This command shows IPv4 filter information.
Parameters filter-type filter-type — Specifies the type of filter to display.
ip-filter-id — Specifies the IPv4 filter policy for which to display information. Values can be
entry entry-id — Specifies the filter policy entry (of the specified filter policy) for which to
associations — Appends, to the detailed filter policy output, information about where the
Router Configuration Guide
: test-dhcp-filter
Values
1 — 65535
Values
config, flowspec, host-common, tms, openflow, vsd
expressed in different formats; the following shows decimal integer format.
Values 1 to 65535
display information.
Values
1 to 65535
specified filter policy is applied.
Filter Policies
603