Alcatel-Lucent 7450 Configuration Manual page 117

sgt-qos
Syntax sgt-qos
Context config>router
Description This command configures DSCP/Dot1p re-marking for self-generated traffic.
application
Syntax application dscp-app-name dscp {dscp-value |dscp-name}
application dot1p-app-name dot1p dot1p-priority
no application {dscp-app-name | dot1p-app-name}
Context config>router>sgt-qos
Description
This command configures DSCP/Dot1p re-marking for applications.
Parameters dscp-app-name — Specifies the DSCP application name.
dscp-value — Specifies the DSCP value
dscp-name — Specifies the DSCP name.
Router Configuration Guide
ipv4-prefix:
ipv4-prefix-length:
ipv6-prefix:
ipv6-prefix-length:
Values
exclusive
When this option is specified, the addresses configured are
exclusively used for services and cannot be assigned to network
ports.
Values
bgp, cflowd, dhcp, dns, ftp, icmp, igmp, igmp-reporter, l2tp, ldp,
mld, msdp, ndis, ntp, ospf, pim, ptp, radius, rip, rsvp, snmp, snmp-
notification, srrp, ssh, syslog, tacplus, telnet, tftp, traceroute, vrrp
Values
0 to 63
a.b.c.d (host bits must be 0)
0 to 32
x:x:x:x:x:x:x:x (eight 16-bit
pieces)
x:x:x:x:x:x:d.d.d.d
x:
d:
0 to 128
IP Router Configuration
[0 to FFFF]H
[0 to 255]D
117