Alcatel-Lucent 7450 Configuration Manual page 180

IP Router Configuration Command Reference
ntp-broadcast
Syntax [no] ntp-broadcast
Context config>router>interface
Description
This command enables SNTP broadcasts received on the IP interface. This parameter is only valid
when the SNTP broadcast-client global parameter is configured.
The no form of the command disables SNTP broadcast received on the IP interface.
Default
no ntp-broadcast
port
Syntax port port-name
no port
Context config>router>interface
Description
This command creates an association with a logical IP interface and a physical port.
An interface can also be associated with the system (loopback address).
The command returns an error if the interface is already associated with another port or the system. In
this case, the association must be deleted before the command is re-attempted. The port-id or port-id
for Ethernet ports can be in one of the following forms:
Ethernet interfaces
If the card in the slot has MDAs/XMAs, port-id is in the slot_number/MDA or XMA_number/
port_number format; for example, 1/1/3 specifies port 3 of the MDA/XMA installed in MDA/XMA
slot 1 on the card installed in chassis slot 1.
SONET/SDH interfaces
When the port-id represents a POS interface, the port-id must include the channel-id. The POS
interface must be configured as a network port.
The no form of the command deletes the association with the port. The no form of this command can
only be performed when the interface is administratively down.
Default No port is associated with the IP interface.
Parameters
port-name — The physical port identifier to associate with the IP interface.
180
Values The following values apply to the 7750 SR:
port-name port-id[:encap-val]
encap-val 0
0..4094
Router Configuration Guide
for null
for dot1q